102+ Woodworking Plans For Kids Toys

s3-us-west-1.amazonaws.com

```html

Introduction: Building a Simple Birdhouse

So you want to build a birdhouse! It's a fun and rewarding project, even for beginners. This step-by-step guide will walk you through building a basic birdhouse that's perfect for small birds like wrens, finches, or chickadees. We'll cover everything from gathering your materials to putting the finishing touches on your new avian abode.

Materials You'll Need:

• Untreated wood (pine, cedar, or redwood are good choices; about 1/2 inch to 3/4 inch thick)
• Wood glue
• Screws or nails
• Saw (hand saw, jigsaw, or circular saw)
• Drill with various sized bits (including a pilot bit and a hole saw bit)
• Measuring tape or ruler
• Pencil
• Sandpaper
• Clamps (optional, but helpful)
• Safety Glasses
• Work Gloves

Step-by-Step Instructions:

1. Cut the Wood Pieces: Here's a suggested cut list for a small birdhouse. Adjust the dimensions to suit your preferences. Remember to measure twice, cut once!
   • Front: 6" wide x 8" high
   • Back: 6" wide x 10" high
   • Sides (2): 6" wide x 7" high (with a slight angle cut to the top to create a roof slope)
   • Bottom: 6" wide x 6" deep
   • Roof (2): 5" wide x 8" long
2. Assemble the Sides, Front, and Bottom: Apply wood glue to the edges where the pieces will connect. Clamp or hold the pieces together tightly. Use screws or nails to secure the sides to the front and bottom. Pre-drilling pilot holes will prevent the wood from splitting.
3. Attach the Back: Apply glue to the edges of the sides and bottom where the back will connect. Secure the back piece with screws or nails. Make sure the bottom of the back panel is flush with the bottom panel of the birdhouse.
4. Drill the Entrance Hole: Select a drill bit size appropriate for the birds you want to attract. A 1 1/8" to 1 1/4" hole is good for wrens and chickadees. Position the hole about 2 inches from the top of the front panel. Carefully drill the hole.
5. Attach the Roof: Apply glue to the top edges of the front, back, and side panels. Position the roof pieces, overlapping them slightly at the top. Secure the roof pieces with screws or nails. Make sure the roof extends slightly beyond the front and sides of the birdhouse to provide protection from the rain.
6. Sand the Rough Edges: Use sandpaper to smooth any rough edges or splinters. This will help prevent injury to birds and make the birdhouse look more polished.
7. Optional: Add Drainage Holes: Drill a few small drainage holes in the bottom of the birdhouse to prevent water from accumulating inside.
8. Optional: Painting or Staining: If you choose to paint or stain the birdhouse, use non-toxic, bird-safe paints or stains. Avoid painting the inside of the birdhouse. Light, natural colors are generally preferred.

Conclusion: Your Birdhouse is Ready!

Congratulations! You've successfully built a birdhouse. Now, find a suitable location to hang or mount your new birdhouse, preferably in a sheltered spot away from predators. Enjoy watching the birds move into their new home! Remember to clean the birdhouse out annually after nesting season to keep it a healthy environment for your feathered friends.

```

Wooden Toys Kids Can Make

woodworkingchallenge.com

Woodworking Plans Kids Toys Plans For Wood House Plans Download

flowagepseudo.wordpress.com

Woodwork Woodworking Projects Kids Toys Pdf Plans

s3-us-west-1.amazonaws.com