197+ Free Woodworking Plans Pdf Free Download

buildbookbuzz.com

```html

Introduction: Building a Simple Birdhouse This post will guide you through the steps of building a basic birdhouse. Birdhouses are a fun and rewarding project for woodworkers of all skill levels. They provide a safe and welcoming home for birds and add a touch of nature to your backyard. This plan uses common lumber and tools, making it accessible to most DIY enthusiasts.

Materials and Tools:

Lumber: One 1x6 board, approximately 6 feet long (pine or cedar are good choices)

Fasteners: Wood screws (1 1/4 inch) or nails

Tools: Saw (circular saw or hand saw), Drill with drill bits, Measuring tape, Pencil, Sandpaper, Hammer (if using nails)

Step 1: Cutting the Wood Using the following dimensions, cut the lumber into the necessary pieces. These are suggestions, you can modify them to better suit the birds in your area!

Front: 6 inches wide x 8 inches tall

Back: 6 inches wide x 10 inches tall

Sides (2): 6 inches wide x 7 inches tall

Bottom: 6 inches wide x 6 inches long

Roof (2): 6 inches wide x 7 inches long

Remember to measure accurately and cut carefully for a snug fit.

Step 2: Creating the Entrance Hole On the front piece, measure down about 2 inches from the top and mark the center. Using a drill bit appropriate for the type of bird you want to attract (typically 1 1/2 inches for common birds), drill the entrance hole. Sand the edges of the hole to prevent splinters.

Step 3: Assembling the Birdhouse Body Start by attaching the sides to the bottom piece. Use wood screws or nails to securely fasten the pieces together. Next, attach the front and back pieces, ensuring they are flush with the sides and bottom. The back piece should extend slightly above the sides to create a slanted roof.

Step 4: Attaching the Roof Align the roof pieces with the top edges of the front, back, and sides. Attach the roof pieces using screws or nails. The roof should overhang slightly on the front and back to provide weather protection.

Step 5: Sanding and Finishing Sand all the edges and surfaces of the birdhouse to remove any splinters or rough spots. You can leave the birdhouse unfinished, or you can apply a non-toxic, water-based sealant or paint. Avoid using bright colors or elaborate designs, as these can deter birds.

Step 6: Mounting the Birdhouse Choose a suitable location for your birdhouse. It should be in a sheltered spot, away from predators and strong winds. You can mount the birdhouse on a pole, tree, or fence post. Ensure it is securely attached. Consider the direction the entrance faces; east or southeast is often recommended.

Conclusion: Enjoy Your New Birdhouse Congratulations, you've built a simple birdhouse! With a little patience, you will likely see birds moving in and making it their home. Remember to clean the birdhouse out each year after the nesting season to keep it a healthy environment for future residents. Enjoy watching the birds and the beauty of nature!

```

21 Free Resources For Authors

buildbookbuzz.com

Michigan Lottery's Free Online Play Offer Begins Today

milotteryconnect.com

Free Online Dba Program Opportunities

www.ssbm.ch