111+ Woodworking Plans For Jigsaw Puzzle Table

www.grainger.com

```html

Introduction: Crafting Your Own Jigsaw Puzzle Table

A jigsaw puzzle table provides a dedicated, flat surface for your puzzling passion. No more precarious balancing acts on coffee tables or the floor! This guide will walk you through building a simple, functional puzzle table. The dimensions can be adjusted to suit the size of puzzles you typically work on and the space available in your home.

Materials and Tools:

Here's what you'll need to get started:

Sheet of plywood (4ft x 4ft is a good starting point, adjust as needed)

4 Wooden legs (table legs, available at most hardware stores)

Wood screws (appropriate length for attaching legs)

Wood glue

Sandpaper (various grits: 120, 220)

Measuring tape

Pencil

Drill with drill bits

Saw (circular saw, jigsaw, or hand saw)

Clamps (optional, but helpful)

Finishing supplies (paint, stain, varnish, polyurethane optional)

Step 1: Preparing the Plywood Surface

Start by measuring and cutting your plywood to the desired size. A standard size for a puzzle table is around 3ft x 4ft, but adjust to fit your puzzle preferences. Use your saw to make a clean, straight cut. Lightly sand the edges and surface of the plywood to remove any splinters or rough spots, starting with 120 grit and moving to 220 grit for a smooth finish.

Step 2: Attaching the Table Legs

Turn the plywood sheet upside down. Position the table legs at each corner, approximately 2-3 inches from the edge of the plywood. Use a pencil to mark the locations where the legs will be attached. Apply wood glue to the top of each leg where it will contact the plywood. Pre-drill pilot holes through the plywood at the marked locations to prevent the wood from splitting when you insert the screws. Attach the legs to the plywood using wood screws. Ensure the legs are securely fastened. Clamps can be used to hold the legs in place while the glue dries and screws are set.

Step 3: Sanding and Finishing

Once the glue is dry and the legs are secure, give the entire table another light sanding with 220 grit sandpaper to ensure a smooth surface. Wipe away any dust with a clean cloth. Now, you can apply your chosen finish. You can paint the table, stain it to bring out the wood grain, or apply a clear varnish or polyurethane to protect the wood and provide a durable surface. Follow the instructions on your chosen finishing product for application and drying times. Multiple coats may be needed for optimal protection.

Step 4: Adding Edge Protection (Optional)

To prevent puzzle pieces from sliding off the table, consider adding a raised edge. This can be done by attaching thin strips of wood (e.g., quarter round molding) around the perimeter of the table using wood glue and small nails or brad nails. Miter the corners for a professional look.

Conclusion: Enjoy Your Custom Puzzle Table

Congratulations! You've built your own jigsaw puzzle table. Now you have a dedicated space to enjoy your favorite hobby without the hassle of clearing away your progress. The beauty of a DIY project is that you can customize it to perfectly fit your needs and style. Enjoy puzzling!

```

24 Must-have Woodworking Tools For Your Workshop

www.grainger.com

Woodworking For Beginners: Everything First-timers Need To Know

www.familyhandyman.com

Woodworking

4hab.com