64+ Woodworking Plans For Bird Feeders

birdcageideas.com

Opening: Attract Feathered Friends with a DIY Bird Feeder!

Want to bring the beauty of nature right to your backyard? Building your own bird feeder is a fun and rewarding project that's perfect for both seasoned woodworkers and beginners. Not only will you provide a valuable food source for local birds, but you'll also enjoy watching them visit your feeder. This guide will walk you through the steps to create a simple, yet effective, platform bird feeder.

Step 1: Gather Your Materials and Tools

Before you start, make sure you have everything you need. This is a crucial step for a smooth build. Here's a list to get you started:

• Wood (Pine, Cedar, or Redwood are good choices about 1 board foot will do)
• Saw (Hand saw, circular saw, or miter saw)
• Drill with drill bits
• Screws or nails (exterior grade recommended)
• Sandpaper
• Measuring tape or ruler
• Pencil
• Wood glue (optional, but recommended for extra strength)
• Wood finish or sealant (optional, to protect the wood from the elements)

Step 2: Cut the Wood Pieces

Now it's time to cut your wood according to the following dimensions. These are just suggestions, feel free to adapt based on the size of your desired feeder:

• Base: 1 piece 12 inches long x 8 inches wide
• Sides (2 pieces): 8 inches long x 2 inches high
• Ends (2 pieces): 12 inches long x 2 inches high

Ensure your cuts are accurate for a better-looking final product.

Step 3: Assemble the Frame

Take the two side pieces and the two end pieces and arrange them to form a rectangle around the base piece. The base will rest inside the rectangular frame. Apply wood glue to the edges of the frame pieces and secure them to the base using screws or nails. Make sure the frame is flush with the base.

Step 4: Sand and Finish

Once the frame is assembled, use sandpaper to smooth any rough edges or splinters. This will make the feeder safer for birds and more pleasant to handle. If desired, apply a wood finish or sealant to protect the wood from the elements. Choose a bird-safe, non-toxic finish. Let the finish dry completely according to the manufacturer's instructions.

Step 5: Add Drainage and Mounting

Drill a few small drainage holes in the base of the feeder to prevent water from accumulating. This will keep the birdseed dry and prevent mold. Decide how you want to mount your feeder. You can drill holes in the sides to attach it to a pole, or you can attach hooks to hang it from a tree branch. Make sure the mounting method is secure and stable.

Step 6: Fill and Enjoy!

Your DIY bird feeder is now complete! Fill it with your favorite birdseed and hang it in a location where you can easily observe the birds. Keep the feeder clean and regularly replenish the seed to attract a variety of feathered friends. Enjoy watching the birds visit your new creation!

Conclusion: Reap the Rewards of Your Hard Work

Building your own bird feeder is a simple and satisfying project that brings you closer to nature. With a little effort, you can create a welcoming haven for birds in your backyard and enjoy the beauty and joy they bring. Remember to keep the feeder clean and well-stocked, and happy bird watching!

Wooden Bird Feeders Plans Free

birdcageideas.com

Wooden Bird Feeders Plans Free

birdcageideas.com

Plans For Wooden Bird Feeders

birdcageideas.com